Results 1 to 3 of 3
  1. 08-09-2018, 09:56 PM #1
    19trx Patriot
    19trx Patriot is online now
    Member
    Join Date
    Jun 2016
    Location
    Medina,Ohio
    Posts
    319

    Triton 19trx setup

    I have a 2018 Triton19trx with a Mercury 225hp Optimax.
    I am using a Fury 3 blade 24p with two power pole blades and 4 batteries.
    Hole shot is good, but I am getting only 60mph and my analog rpms r over 6000!
    I am thinking I need a 25p Fury or higher. Any suggestions?
    Reply With Quote Reply With Quote
  2. CoastieWess
    CoastieWess is offline
    Member
    Join Date
    Dec 2013
    Location
    Vacaville, CA
    Posts
    43
    #2 08-09-2018, 10:45 PM
    PM'D
    Reply With Quote Reply With Quote
  3. Tim W
    Tim W is offline
    Member Tim W's Avatar
    Join Date
    Apr 2013
    Location
    Tomball, Tx
    Posts
    3,648
    #3 08-10-2018, 01:02 PM
    Im running a 19xs which I believe is the same hull. If you can try a Tempest + that would be good. I have a 25 Furry and im getting 5740 RPM at 65 mph in this summer heat. With a 25 Tempest + im at 55 to 5600 at 70 to 71mph.

    I did purchase a 24 tempest + to help rpm in this south Texas heat that I have not ran yet.

    I have 2 ten foot poles, 4 batteries, an ultrex 112 and I carry a heavy load.

    It seems these boats like to run high. I have a 10" z lock jack plate that's raised up high but my H20 pressure is still at 25 psi at wot

    Triton 19 XS Elite, 225 Mercury Pro XS, Minn Kota Ultrex 112, Hydrowave H2, Twin 8' Power Pole Blades, Power Pole CHARGE, Lowrance HDS 12 and 16 at console, Lowrance HDS 9, Garmin LiveScope at bow, Mercmonitor, Rigid Industries Deck lights and other stuff to come that will make me go more broke
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »