Results 1 to 6 of 6
  1. 08-09-2018, 07:13 PM #1
    CoastieWess
    CoastieWess is offline
    Member
    Join Date
    Dec 2013
    Location
    Vacaville, CA
    Posts
    43

    Setup help for 02 Ranger 520dvx

    Backstory: I repowered to a 2015 225 ProXs and was told that the motor was a hot one compared to others. It definitely is!

    Ran it today.
    4" Atlas hyd. JP
    25P FURY 3
    Prop to Pad ranged from 4" to 2 1/4"
    Best results were 2 1/2"
    GPS 70.5mph and hit 71 a couple times.
    RPMs were 5510.
    Air temp was 98.
    Water temp 78.
    Elevation 443ft.

    So I'm guessing go down to a 24P to get my RPM's to the peak HP range?
    Last edited by CoastieWess; 08-09-2018 at 10:11 PM.
    Reply With Quote Reply With Quote
  2. fishfarm
    fishfarm is offline
    Fishfarm (Jay) fishfarm's Avatar
    Join Date
    Mar 2009
    Location
    Kingman Arizona
    Posts
    2,290
    #2 08-10-2018, 03:03 PM
    Yes you can go to a 24. If you run a 25p tempest you drop down one pitch for a fury 3 or fury 4
    2000 520vx Ranger
    250 PRO XS
    SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
    Reply With Quote Reply With Quote
  3. CoastieWess
    CoastieWess is offline
    Member
    Join Date
    Dec 2013
    Location
    Vacaville, CA
    Posts
    43
    #3 08-10-2018, 06:19 PM
    Quote Originally Posted by fishfarm View Post
    Yes you can go to a 24. If you run a 25p tempest you drop down one pitch for a fury 3 or fury 4
    Previously I was running a old 25 tempest with the standard 2002 opti 225.
    Do you prefer your four blade over the 3?
    Reply With Quote Reply With Quote
  4. fishfarm
    fishfarm is offline
    Fishfarm (Jay) fishfarm's Avatar
    Join Date
    Mar 2009
    Location
    Kingman Arizona
    Posts
    2,290
    #4 08-10-2018, 07:35 PM
    Quote Originally Posted by CoastieWess View Post
    Previously I was running a old 25 tempest with the standard 2002 opti 225.
    Do you prefer your four blade over the 3?
    Absolutely anyday of the week.
    2000 520vx Ranger
    250 PRO XS
    SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
    Reply With Quote Reply With Quote
  5. transdep1
    transdep1 is offline
    Member
    Join Date
    Sep 2006
    Location
    Newnan, Georgia
    Posts
    1,209
    #5 08-12-2018, 07:40 PM
    If you still have the 25 tempest , try it.....
    Reply With Quote Reply With Quote
  6. CoastieWess
    CoastieWess is offline
    Member
    Join Date
    Dec 2013
    Location
    Vacaville, CA
    Posts
    43
    #6 08-13-2018, 01:53 PM
    Quote Originally Posted by transdep1 View Post
    If you still have the 25 tempest , try it.....
    That was my original plan, but when I repowered to the 2015 ProXS it came with a torquemaster 1.25" shaft and my Tempest A40 has the pressed in hub for the 1" shaft.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »