Is best for my 2015 FX20
Is best for my 2015 FX20
25 T-1
I prefer the 25 T-2 its suppose to replace the T1.. I know a lot of guys say T1 but the T2 is made better.. Mine came with the T2 and a lot of my friends with skeeters there boat came with a T1 and all of them run a 25 T2 now. but all in all either prop is fine unless you get your prop worked you won't notice really any difference
why not a fury prop with the holes plugged?
The Fury is really small in diameter. The larger diameter props work better on the SHO.
If it was my FX20, I'd be running a 27 Tempest.
Gitcha Bass On!
2015 ZX225
fury 4 and razor 4 runs good on the sho.
What kind of numbers did you get with the Razor 4 and what boat?Originally Posted by waknbass
FX21
I have only been able to run it loaded on top end once and it ran 70 at 5850rpms. I’ve ran it a lot loaded on a lake with a 40mph speed limit. It carries a load, lifts, handles, can stay on plane at much lower speeds and has better hole shot than the 25T-1 I have. I may send it back to Mark in the fall to get my RPM’s up a bit. It’s a very thick/stiff prop. If your not a speed demon, 4 blades the ticket IMO. I definitely am not a fan of the t-1 with a load.
Last edited by waknbass; 08-09-2018 at 08:47 PM.
Thanks man very helpful. I running same boat and no stern lift when loaded
What he said
My 2010 FX20 with 3/4 gas and (2) big dudes hit 75.5 down river the other night with my T1. I have a brand new T2 I ran once...it’s back in box. T1 runs stand better mostly on hole shot
Twin sticks on boat
Reply With Quote