Looking for how your power poles were installed , specifically the newer thicker hoses that are thru hull. Just wanted to see how most are done.
Looking for how your power poles were installed , specifically the newer thicker hoses that are thru hull. Just wanted to see how most are done.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
Drill big holes. Its about the only choice you have
2020 Nitro Z20 250 Pro XS
That what I assume but where does your have the holes at. The splash well, in front of the big motor?
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
'17 Nitro Z21, 250ProXS serial # 2B399616, 24p Fury4, 12" Atlas, Apex 16 @ console, Apex 16 & Apex 13 @ bow, Mega 360, Ultrex, 8ft blades
I have mine in the upper edge of the splashwell just under the hinge for the back compartment lid. The hoses are really long and you will have excess hose bundled up when you are done no matter how they are put in
2020 Nitro Z20 250 Pro XS
I ran mine along with rest of steering and other cables that tucked under a little chrome cover that's attached to boat. I can get pics of needed.
2010 Z-7 Mercury 150 Optimax,
Keel guard, pro trim,
Humminbird Electronics
Western Mass.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
2010 Z-7 Mercury 150 Optimax,
Keel guard, pro trim,
Humminbird Electronics
Western Mass.
make 1 hole instead of 2.
2018 Nitro Z-19, 200 Merc Pro XS, Merc Monitor, SC Gauges, Lowrance/Humminbird Electronics, Humminbird 360, HydroWave.
I like that idea. I may have my dealer do it. Cutting holes in my boat is not something I feel comfortable doing.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
It’s a very clean install. My batt box is well organized and the hoses are well hidden and out the way
2018 Nitro Z-19, 200 Merc Pro XS, Merc Monitor, SC Gauges, Lowrance/Humminbird Electronics, Humminbird 360, HydroWave.
2023 Nitro Z21 XL Pro
2023 Pro XS 250
Lowrance Ghost
Lowrance HDS 12 Live
Lowrance HDS 12 Live
Dual CM2 8' Blades
Tow Vehicle
2022 GMC AT4 3500 HD Crew Cab Duramax
2008 Dodge Ram 3500 6.7 Cummins
I have no Hoses ? Mine says Talon
2023 Nitro Z21 XL Pro
2023 Pro XS 250
Lowrance Ghost
Lowrance HDS 12 Live
Lowrance HDS 12 Live
Dual CM2 8' Blades
Tow Vehicle
2022 GMC AT4 3500 HD Crew Cab Duramax
2008 Dodge Ram 3500 6.7 Cummins
Well I was able to install them thru the rigging tube without drilling. Need to finish it up and i'll get some pics. Also added a Power pole light, man i hope that holds up.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
How are the new hoses? Are they more easy to maneuver? The old style were very rigid and a b#### to get routed correctly. I found out that if I get a second power pole it won't be compatible with my current remotes but they offered to build me a power pole with the old style pump.
2015 Nitro Z-7 175 Pro XS
Hoses are less rigid then before but thicker. U cannot cut the hoses to any length, so u may have excess hose in your bilge area.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
2016 Z20 Pro
Ultrex, Lowrance, Merc Monitor, NMEA 2k, Point 1, Gatorbaks.
If you do it this way make sure it's exactly the same way with the hose clamped down on the transom some distance from where the line enters the hull. This eliminates the chafing on the cover plate. Mine goes right into the opening and rubs on the edge of that escutcheon plate covering the hole. Not good. I like the strain relief grommets that go right through the hull and will change mine over the winter.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD