Still playing with props was curious on which hole everybody’s else motor is on there atlas. I’m running a FX21LE and mine is at the third hole from the top. Thanks
Still playing with props was curious on which hole everybody’s else motor is on there atlas. I’m running a FX21LE and mine is at the third hole from the top. Thanks
18 ZX 250 with Atlas 3rd hole from the top
same
We crap! Hoping that was my problem. Back to the drawing board.
What are you trying to accomplish now?
MattandAmber Lawler on Facebook
Matt Lawler HF on Facebook
matt_lawler_hf on Instagram
"There ain't a price on stupid. Stupid comes for free."
Jonathan Hillstrand
I’m still not getting stern lift with a tournament load like I would like. Guess I’m going to try a 4 blade. Maybe one of Marks Razor 4.
Might be a dumb question, but have you had your prop worked? Mark done mine a couple weeks ago, and the change is amazing. My boat did not lift hardly at all, and that was the first thing I noticed when i got it back. Lift is incredible. Gained 4mph as well. I'm also running a FX21 LE
Get trailing edge cup added to your current prop. Stern lift problem solved. IF your current prop is producing good enough numbers, then I would just get that done. If not, then also get some tip cup as well (generally good for Skeeters) or just get a whole B&B and tell the prop guy what you are looking for.
Why does everyone want to check by number of holes?
Why not level the boat and motor and do a prop to pad measurement? My 2013 FX20 is about 2" below the pad.
Put money into the T1, that way if the adjustment doesn't work on the T2 you still have a good prop in the T2.
NHRG...all the props have to have the same setup on the transom or your numbers measuring
the pad to prop would be all over the board...I still like the T2, mine is a 26 and I can bump
the rev limit, the 26 tempest plus also runs strong on hole shot and top end..just FYI.
CARL MAYER
SKEETER FX20 2016
BARRYVILLE NY 12719
2023 FORD RAPTOR
What's the rev limiter? Must be past 6000? About 6200? Does it hurt anything if u bump it?
You could call Jerry and check with him about your prop... He still does a few..lil added cup will get your bow lift up where you want it..
MattandAmber Lawler on Facebook
Matt Lawler HF on Facebook
matt_lawler_hf on Instagram
"There ain't a price on stupid. Stupid comes for free."
Jonathan Hillstrand