Loading RT188 onto trailer?

[tjsellsfords]

not sure this will help much but I made this video this morning

[Mikey D]

Thanks, all, for the tips, photos and video. Centering my weight is something I haven't tried.

[Illymost]

I agree with what has been said previously. I have one more tip. When I'm the only one in the boat while loading, I have to center my weight to get the boat to settle on the bunks right. If I don't then it tends to drift and stay off center.

This. When I’m by myself I sit in the middle seat.

[BigDozer66]

Here is a couple of pictures although not very good lighting where the boat is stored. The roller is a Stoltz ULT-435 for those that asked and the outside roller diameter is 4 1/4 inches around 1" away from the boat I hope if I hit the outer roller it pushes me into the center V roller. I will have to wait until I get back on the water in some rougher water to see if it helps.

I got mine in today from Amazon (about 1/2 price from the warehouse) and will get it put on next time at the lake.

[fishon396]

Glad you looked around and found a deal. I know it would make more sense and be easier to put on at the lake but I got impatient and put it on at the house. It was easy with a small bottle jack sitting on the spare tire and a little piece of wood on top of the ram in front and against the bow hook. I only had to lift the boat 1/2 inch at the most. I almost got in on without the jack.

[PolarKraft195]

This. When I’m by myself I sit in the middle seat.

^me too^
I always sit in middle seat when loading myself

I also upgraded to a Stoltz roller on my Polar Kraft

[gatorglenn]

This. When I’m by myself I sit in the middle seat.

Me 3
Work every time.