-
Member
29 Croxton Razor 3
Tried this prop in attempt to break 90. I know the experts are going to say you're foolish running a Gen2 like that. In all honesty it probably is. It also may be the reason I CAN'T HIT 90!! Like trying to get Filet Mignon out of chuck beef
But boy is this prop hooked up!! At 1 3/4" below pad I hit 85 at only 5520 RPM's. That's GPS and SmartCraft of course. At 5000 RPM's, I was doing 75!! I wish it had another 500 RPM's to it. I guess I also wish I had a Sporty I could borrow
Joe Perez
Boatless white trash
-
Moderator
You motor is making less HP at low rpms.... I tried to tell you what you need..
-
Member
Mike,
I know. I just can't find one and you're not going to lend me your 28TXP
Kidding aside. Original owner had Mark ADD CUP to stock prop. I wonder Mark could dial it down a notch on the cupping and when cooler weather comes, if I would get closer to max HP?
Also posted on want ads for 30 Bravo worked.
Joe Perez
Boatless white trash
-
Member
Hey Mike,
Can't find a 28TXP but I found a 27. You think I can get Mark to work that one close to a 28? It is completely stock and perfect.
Joe Perez
Boatless white trash
-
Moderator
-
Member
Had Mark work the 29 Razor to a 28 and cooler weather is upon us....Can't wait to try it!!
I also bought the 27 Powertech Rothwell had. Already tried that one. Great hole shot and mid range but not fast. I am going to play with it some more to decide if it is better than my 26 Fury4 as a fishing prop.
Joe Perez
Boatless white trash