Has anyone tried having a Bravo xs worked to get a little bit more bow lift? With a light load on my Lake and Bay I am in the mid 70’s with a medium load it won’t get the bow up and I am under 70. 5800 rpm’s with a load, over 6000 light.
Has anyone tried having a Bravo xs worked to get a little bit more bow lift? With a light load on my Lake and Bay I am in the mid 70’s with a medium load it won’t get the bow up and I am under 70. 5800 rpm’s with a load, over 6000 light.
Mark Croxton can do it easily. He has modified two 26" Bravos for me. A little tip cup will lift the bow better without adding pitch. Talk to Mark and let him know what you are looking for.
Wish you were closer, I have a 25p that will lift your bow
What hull and engine are you running that 26 Bravo on?
2013 Z9 250 Pro XS 1B936712
<'/////>< Tie one on... The knots for life.
If you have a fixed jp, you may want to check the ptp,sounds like it may be a touch high...
Yes it does, but can only run about 76 before I get close to the limiter, but it flies out of the hole
Thanks guys. I will get with Mark and see what he thinks