Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Dec 2004
    Location
    maryville, tn
    Posts
    305

    water pressure issue

    serial # 1b886688

    have a 200 pro xs and had maintaince done at merc dealer and also had water pump impellar changed.now system monitor gauge show 0 psi and analog guage also shows o ran up to about 4000 rpms and temp ran about 125 . have a steady strong stream out of the tell tale and no overheat issues . anything I can check before I make the trip back to the dealer?

    thanks

  2. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,104
    #2
    Nope, the water pump is the issue.



  3. Member
    Join Date
    Dec 2004
    Location
    maryville, tn
    Posts
    305
    #3
    found the issue it was the water pressure hose coming out of the block was disconnected.

  4. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    94,945
    #4
    Quote Originally Posted by ficht158 View Post
    found the issue it was the water pressure hose coming out of the block was disconnected.
    Good catch- that would definitely knock out both gauges.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor