Im now stocking many sizes of Stoltz Products, if you are not sure what you need PM me I can get you a match , if you are still using a Yellow Bow Roller its time for an upgrade.
lhttp://www.drew-tek.com/parts/produc...y/bow-rollers/
- Guaranteed to outlast any other roller on the market
- NEW U.V. stabilized formula will maintain its color much longer
- Lab tests have proven that Polyurethane has much better cut and abrasion resistance than PVC
- Will not mark your boat
- Won't flat spot
- Extremely cut resistant
- Made in the USA
LONG LASTINGSTOLTZ Super Rollers are made of polyurethane, to replace rubber and PVC rollers that need frequent replacement. Although they cost more initially, their long life makes them economical in the long run. Polyurethane is extremely cut and abrasion resistant. Won’t split or crack, even in extreme cold.
NON-MARKING
Our rollers do not leave the black scuff marks that black rubber rollers do. No more hard work cleaning the bottom of your boat. We have seen catalogs advertise black rubber as “non-marking”, but that just is not true.
MAKES LAUNCHING EASY
If your boat is supported by our rollers, it will roll right off. Some trailers have either no rollers at all, or ones that don’t touch the boat. Adding a couple of our keel rollers to a bunk trailer that has none, will greatly reduce the effort to launch and retrieve your boat. Adjustable brackets are widely available. I would recommend the one piece variety. What you are doing is shifting some of the weight from the carpeted bunk to the roller, thereby reducing the friction between boat and trailer. You will be amazed at how much easier they make launching. You also don’t need to submerge the trailer to float off the boat. You won’t get water in the wheel bearings, and will keep the tow vehicle off of the slippery portion of the ramp. They also provides better support for the keel and transom, which many boat manufacturers recommend. Our rollers won’t flat spot after months of storage.