Results 1 to 4 of 4
  1. #1
    BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,831

    Stoltz Bow Rollers

    Im now stocking many sizes of Stoltz Products, if you are not sure what you need PM me I can get you a match , if you are still using a Yellow Bow Roller its time for an upgrade.

    lhttp://www.drew-tek.com/parts/produc...y/bow-rollers/




    • Guaranteed to outlast any other roller on the market
    • NEW U.V. stabilized formula will maintain its color much longer
    • Lab tests have proven that Polyurethane has much better cut and abrasion resistance than PVC
    • Will not mark your boat
    • Won't flat spot
    • Extremely cut resistant
    • Made in the USA


    LONG LASTINGSTOLTZ Super Rollers are made of polyurethane, to replace rubber and PVC rollers that need frequent replacement. Although they cost more initially, their long life makes them economical in the long run. Polyurethane is extremely cut and abrasion resistant. Won’t split or crack, even in extreme cold.
    NON-MARKING
    Our rollers do not leave the black scuff marks that black rubber rollers do. No more hard work cleaning the bottom of your boat. We have seen catalogs advertise black rubber as “non-marking”, but that just is not true.
    MAKES LAUNCHING EASY
    If your boat is supported by our rollers, it will roll right off. Some trailers have either no rollers at all, or ones that don’t touch the boat. Adding a couple of our keel rollers to a bunk trailer that has none, will greatly reduce the effort to launch and retrieve your boat. Adjustable brackets are widely available. I would recommend the one piece variety. What you are doing is shifting some of the weight from the carpeted bunk to the roller, thereby reducing the friction between boat and trailer. You will be amazed at how much easier they make launching. You also don’t need to submerge the trailer to float off the boat. You won’t get water in the wheel bearings, and will keep the tow vehicle off of the slippery portion of the ramp. They also provides better support for the keel and transom, which many boat manufacturers recommend. Our rollers won’t flat spot after months of storage.
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  2. Better Lucky Than Good! Casslaw's Avatar
    Join Date
    Jun 2018
    Location
    Tampa, FL
    Posts
    7,035
    #2
    I received mine in the mail today and for a “piece of plastic” I’m much more happy than I should be! Thank you for all your help and this is going on tomorrow for sure! You were great to deal with, thanks again.
    2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV

  3. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,831
    #3
    Quote Originally Posted by Casslaw View Post
    I received mine in the mail today and for a “piece of plastic” I’m much more happy than I should be! Thank you for all your help and this is going on tomorrow for sure! You were great to deal with, thanks again.
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  4. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,831
    #4
    Get them here and if you are not sure what you need I will be happy to help you get the right part, I have much more options than what is on the website.

    http://www.drew-tek.com/parts/produc...y/bow-rollers/
    Attached Images Attached Images
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com