Which graph for 360 only?

[gonzz]

I just ordered a ultrex and will be running 360 on it. What graph would you use to run the 360? I also have a Carbon 12" for everything else. Just need new graph for 360. Thanks for the suggestions.

[fxdwgkd]

Helix 12 do not need a di or si model if just using 360 and you have the lowrance for everything else up front you would want. Do not even need to hook up the transducer that comes with the unit
Solix would be a waste of the extra money for using a 360 stand alone

[bandit53]

I have essentially the same setup, only running a HDS12G3 rather than Carbon. I have a Helix 10 SI G1 dedicated to 360. If you can get a good deal, 12 is better, but I find the 10 to be adequate.

[gonzz]

Do you have a dual mount on the bow?

I have essentially the same setup, only running a HDS12G3 rather than Carbon. I have a Helix 10 SI G1 dedicated to 360. If you can get a good deal, 12 is better, but I find the 10 to be adequate.

[Wallace]

I run a 10 g2n and have been very pleased but in less than 3 ft from it

[4Kboater]

You mentioned getting an Ultrex, might want to use the included US2 transducer for the 360 depth readings for the new graph. I have a Helix 12 G2 as I wanted a larger screen for ease of viewing while standing. Also if you don't use a transducer for the new graph be sure to turn the sonar off.

[Chris1978]

Helix 12

[Capw]

Helix 12

[Wayne P.]

Helix 12

[bigfishsmallcamera]

Helix 12

[Bstandiford]

I listened to everyone on here and bought the Helix 12 for 360 at bow! No regrets!