Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    Wagener S.C.
    Posts
    409

    Fury 4 on older TR 21

    Looking for a place to start on my 03 TR21 250proxs gen 2 torque master as far as the vent holes I have a hydraulic plate

  2. Member
    Join Date
    Apr 2016
    Location
    Erin, TN
    Posts
    485
    #2
    get a prop to pad measurement. I would start at 3" below pad and adjust from there
    Stratos 201 Pro Elite, Evinrude 200 Etec H.O., Minn Kota, Humminbird



  3. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,197
    #3
    Looking for a place to start on my 03 TR21 250proxs gen 2 torque master as far as the vent holes I have a hydraulic plate
    What pitch did you get?



  4. Member rocketman6965's Avatar
    Join Date
    Mar 2014
    Location
    Lake Worth, FL
    Posts
    1,612
    #4
    I run a 26 at 2" below with 10" Atlas plate. 82mph anytime, heat, load, etc. That IS my fishing prop. Can plane in 3 seconds in 1.4 feet of water

    Joe Perez
    Boatless white trash

  5. Member
    Join Date
    Jul 2009
    Location
    Wagener S.C.
    Posts
    409
    #5
    I got the 25 do a lot of running and gunning in the summer chasing herring fish so I wanted a awesome hole shot

  6. Member
    Join Date
    Jun 2017
    Location
    Murray Ky.
    Posts
    82
    #6
    On my 05 21x I run a 25 also with every other hole closed and the other ones open and it's a great summertime prop!

  7. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,197
    #7
    Quote Originally Posted by krich77 View Post
    I got the 25 do a lot of running and gunning in the summer chasing herring fish so I wanted a awesome hole shot
    How many RPM's are you turning @ WOT and at what MPH?