[ATTACH1530477734693.jpg=CONFIG]332747[/ATTACH]
Are these the correct plugs? Doesn't seem right to me
[ATTACH1530477734693.jpg=CONFIG]332747[/ATTACH]
Are these the correct plugs? Doesn't seem right to me
That's the right ones for that prop
It’s an A 45, 25 pitch. I will try to upload a pic with vent plug installed.
It’s an A 45, 25 pitch. I will try to upload a pic with vent plug installed.
A40 had pressed hub, first gen A45 accepts flo-torq style but had same oval vent holes. Then the A45 Plus went to traditional round PVS plugs.
I didn't know these plugs were available when I ran my A45 on my stratos, so I jb welded the holes shut and drilled to size. Since then I have removed the jb weld and it runs great with the stock openings on my Bass Cat.
2021 Phoenix 920 Elite / SHO 250
Bullet 21XD / 250 XB (Gone to a great home in LA)
"There is no such thing as a bad day fishing!"
I cannot upload the pic with vent plug installed. The plug looks like a bump on a prop, not flush and is barely stuck in the hole. Not like the plus prop vent plugs which are flush and a bugger to install or remove. Does anyone have pic with these plugs installed?
thanks
May not seem right to you but that's the plug that fits that hole in that prop. It's the first generation PVS plug.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
That is what I did. Was able to drill out to fine tune and am some what pleased with performance. Hole shot is good but I am topping out at 69 with 5980 rpm. May have to have it worked on. By the way it is in pristine condition and never been worked.
Thanks
I had my 27 polished and turned out it had been touched before. It measures a stout 28”
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
Funny this post popped up. I repowed today and now my A45 needs plugs. I really don’t wanna JB weld. IMO it would never be true or balanced. I’m interested in these plugs. Until this post I’ve never saw such for a A45
The plugs in post #1 are correct. I have purchased these plugs from BBlades before...…
Click on this >>> Vent Plug – Tempest
They come in ONE SIZE only. Warm them up with a hair dryer before installing.
Vent plugs are in the barrel of the prop, therefore they do NOT effect the balance of the prop.
Last edited by Savage; 07-23-2018 at 07:50 AM.