Could someone show me a picture of where they mounted the humminbird mega si transducer on there champ similar to this one?
Could someone show me a picture of where they mounted the humminbird mega si transducer on there champ similar to this one?
My side imaging ducer is mounted exactly where your 2d is located, remember you're only going to use it at idle and not up on plane. So I also mounted a 2d inside so I still get depth readings on plane. You could mount it on the opposite side above the step so nothing in the water will hit it.
1997 Champion 202
2001 OX66 225
Tempest Plus 26
Maxxum 101 LB
Humminbird 999, 959, 999
I don't have a jackplate. I'm worried about my motor being in the way when I'm trimmed down. Someone has to have a similar boat with a mega tranducer on.
My setup is exactly what shimanostud has listed above
You could mount a stern saver to the top of the step and then you wouldn't have to worry about your motor being in the way but I would be worried about it striking something in the water column. And fyi I had mine mounted in the same location prior to having a plate and ran it all year like that with no issues with the hdsi ducer.
1997 Champion 202
2001 OX66 225
Tempest Plus 26
Maxxum 101 LB
Humminbird 999, 959, 999
Bass-o-maticjm could you send me a picture? danleonard25@hotmail.com if that's easier.
Dan, sorry for the delay but you now have mail.