We just received a large shipment of Fury 4 Blade props. 24, 25, and 26 pitch are in stock and ready to ship. Give us a call at 870-777-6180 if you have been looking for one.
Great place to purchase...
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
what is the difference between a fury 3 and fury 4 other than the blade? Is this the best combination of speed and with 4th blade extra lift/ hole shot perfomance as opposed to a regular 4 blade trophy plus? Anyone know?
the fury 4 is for those heavy boats carrying a heavy load. The fury 3 will be faster in most cases but will not carry a heavy load. Also the fury 3 doesn't have a good of bow lift as the fury4.
I have a 2009 TR21x3 with a 250 pro xs Loaded with 1/2 tank of gas and a 25 fury, dual 12ft talons and atlas jackplate could hit 66 @ 5800 rpms
The same as the above load with a 25p fury 4 I hit 70 mph @ 5800 rpms. Both runs was in 90 degree water temps. This should help show the difference between the 2.
Stratos 201 Pro Elite, Evinrude 200 Etec H.O., Minn Kota, Humminbird
Can you PM me a price on a Fury 4 26?
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
It's as simple as clicking their signature... Here it is >>> https://rothwellmarine.com/product-c...rnet-specials/
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
Are the Fury 4's having issues with slinging a blade?
Just ran for the 1st time a Fury 3 blade on my boat.
I have read about issues back a few months but nothing lately. It was said people were trying to run them too high on the transom but I think there was just a bad batch of props made. Most would sling a blade on first trip out. One guy went through 3 props. I would not be afraid to run one now but I don’t think they are made to run real high on transom.
Just got done testing a fury 4 on z520c. Got the hole shot I was looking for and can also keep my boat up on pad at lower speeds. For me was what I was looking for. Now on to Maine for 2 weeks of bliss!!!