I cleaned the inside of trailer tube. Thisnis the second A60 actuator installed complete assy. I greased both A60 on all contact slide areas and rollers. I did check all brake lines and replaced one 4 inch line steal. All others were as new. Next week Ill be going through everything again, pulling wheels, calibers to grease slide pins and brake pad slides. Then checking over A60 again. This trailer bucks so bad you almost cant stop the Truck. Its buck all the way while trying bring everything to a stop. I can throttle the Truck real quick and pull actuator back out, then it stops. Like said Ill be going over everything. Thanks guys
There is an issue I would look into the suspension components hanger, and bolts to leaf springs, if there is slop it's not good and will allow to almost pulsate like abs
Mercury 250 proxs 2B115089
It’s Calipers not Calibers! Come on man!
Jeez stinking phone spell check
Last edited by ifishinxs; 10-13-2018 at 11:46 PM.
2024 Phoenix 818, Mercury 175. Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Got some questions.
Is this a tandem axle with leaf springs ?
If so--- which axle are the brakes on ?