Mercury hub kit for a Yamaha 250 SHO

**Tamale** · 07-09-2018, 02:58 PM

Ordered a Bravo 1XS and am hearing conflicting suggestions on what hub kit I need for my Yamaha 250 SHO. Can anyone advise?

**Tamale** · 07-10-2018, 08:46 AM

This the correct one?
QUICKSILVER 835274Q1 FLO TORQ HUB KIT

https://nuwavemarine.com/oem-quicksi...kit-835274q-1/

or this one
QUICKSILVER 8M0075402 FLO TORQ HUB KIT

https://www.generalpropeller.com/8M0...xoCuiEQAvD_BwE

**mdtritn21** · 07-10-2018, 09:32 AM

8M0075402 for SHO

**Tamale** · 07-10-2018, 10:21 AM

This is crazy. Even the prop shops are all telling me different hub kits. I'm about 50/50 on which of those 2 to go with. I guess it doesnt matter? WHat is the difference between the 2?

**Rouse4** · 07-10-2018, 01:42 PM

What XS pitch did you go with and motor HP?

**Tamale** · 07-10-2018, 01:50 PM

I went with the BRavo 1 XS 26p to go on my Skeeter FX21 and Yamaha 250 SHO. I borrowed that prop and ran it on my boat and it was like a whole new boat...gained 6mph over the Yamaha T2 prop. I however dont know what hub kit he had in it, and neither does he.

**KWAKZ** · 07-11-2018, 08:47 AM

as stated above, 8M0075402
https://bblades.com/shop/hub-kits/ya...075402-yamaha/

**THOEFT** · 07-11-2018, 07:35 PM

Hope you give a review of the bravo after install. Said you gained 6 mph with borrowed one. So how fast was that?

**Tamale** · 07-11-2018, 09:27 PM

Originally Posted by THOEFT

Hope you give a review of the bravo after install. Said you gained 6 mph with borrowed one. So how fast was that?

My boat would run 67 with a T2. I tried 3 of them, one of them ran 68. My boat ran 71 with my T1. With the Bravo 1 I borrowed I made 1 pass on a very short stretch and got up to 71.6 then ran out of room. I also didnt get to adjust the height on my Atlas because the relay went out. I'm confident its got 2-3 more mph in there after adjusting the plate.

**Randy T** · 07-12-2018, 10:35 AM

Originally Posted by Tamale

This the correct one?
QUICKSILVER 835274Q1 FLO TORQ HUB KIT

https://nuwavemarine.com/oem-quicksi...kit-835274q-1/

or this one
QUICKSILVER 8M0075402 FLO TORQ HUB KIT

https://www.generalpropeller.com/8M0...xoCuiEQAvD_BwE

Both are correct. The difference is in the thrust washers

**THOEFT** · 07-12-2018, 10:51 AM

Thx for response

**jcbasser 52** · 07-24-2019, 01:40 PM

Originally Posted by Tamale

I went with the BRavo 1 XS 26p to go on my Skeeter FX21 and Yamaha 250 SHO. I borrowed that prop and ran it on my boat and it was like a whole new boat...gained 6mph over the Yamaha T2 prop. I however dont know what hub kit he had in it, and neither does he.

did you run it with any open holes or all plugged?

**tracer1** · 08-02-2019, 11:55 AM

Originally Posted by Randy T

Both are correct. The difference is in the thrust washers

.

what is the difference in the thrust washer & which should you use? Bravo 1 XS 27p on 250 SHO

**magqw7** · 08-02-2019, 01:26 PM

The 402 is what worked with my sho and I run a bravo

**unclesam321** · 11-11-2020, 11:18 PM

Same kinda question.. if using a tempest 25 which hub? The 402 and then do I use the factory 2 piece thrust washer that came on boat?

**Wild Card** · 11-15-2020, 06:37 PM

I HAVE A 250 SHO AND HAVE A BRAND NEW MERCURY HUB KIT I WILL GIVE YOU A GOOD PRICE ON.

STEVE CARD
SCARD@METURF.COM

**bass.man65** · 11-15-2020, 07:31 PM

That hub will work but I would buy the solid hub piece and trash the plastic one. On a 250 the plastic one won't last long.

**Shadowred200vt** · 10-18-2021, 12:21 AM

Do you happen to know the solid hub part number

Thread: Mercury hub kit for a Yamaha 250 SHO

Thread Tools

Search Thread

Display

Mercury hub kit for a Yamaha 250 SHO