I have a 99 2100 super vee with a Johnson 225 ho. Running 3.5 below pad and a 24 raker. Raker kit something today and is in rough shape. Looking for the best prop to order and maybe a few tricks to a good set up! Thanks!
I have a 99 2100 super vee with a Johnson 225 ho. Running 3.5 below pad and a 24 raker. Raker kit something today and is in rough shape. Looking for the best prop to order and maybe a few tricks to a good set up! Thanks!
How would I contact him? New to this boards stuff.
Marks High Performance Propellers
317-398-9294
propellerman59@gmail.com
Anyone got any wiring diagrams for a 97 pro vee 180
When you get your prop repaired get cup added for stern lift. I had it done to a prop on my 250XB/ 95 200 Pro Vee which had the same hull and mine picked up 5 mph. Mine would run 84.5 solo and 81.5 with 2 on board with water in livewell.
Richard
I've got a 2001 2100 Pro Sport. I love that boat's smooth dry ride. I'm very interested in how you got yours to run 84 mph Richard. I have an 02 225 efi and would like to do some mods to get the speed up.
Tony
I have a 2004 2100 Pro Sport with 225 EFI. When I first got my Bee it had a 26P Trophy The ride was great but top speed is only in high/mid 60's This prop wont climb a trailer at all. I contacted Mark and spoke with him about my set up. He suggested a 25P Tempest Plus for the fastest possible ride. I followed his advise and yes the Tempest is faster and power loads fine. The ride in Rough water is just not even close to what I got with that 4 blade. Hole shot was much better with the 4 blade as well
I touched base with Mark 1 more time and he suggested a 25P Fury 4 I have one and am going to test it out this weekend hopefully I will report back on how the Fury 4 does Hoping for 70 MPH or close
All the bees ive been around like the furys!!
Back from the lake and this is definitely the best prop that I h,ave tested thus far. Hole shot and mid range were great. Top speed with 2 big men in the boat was 68. Fury 4 25P
If you want to get the most out your 225 go to 3liter high performance page on here and look in frequently asked questions on top of the section. I did whole article on hopping up a 3 liter Guys believe me on the prop cupping. A Bumble Bee needs stern lift. It will lift the rear of the boat about 6 inches reducing drag which is most important for speed. I had the fastest Bee at 4 Bumble Bee rallies in a row. Not bragging just the facts.
Richard
Richards right on the cupping!!i really wish i would have kept my 180provee and put a 225 promax on it!