Can someone give me some info on this boat? Maybe taking a ride to look at one. Good hull? What's the beam?
How would it compare to a G3 Eagle 170? (if someone might know both boats)
thanks
Can someone give me some info on this boat? Maybe taking a ride to look at one. Good hull? What's the beam?
How would it compare to a G3 Eagle 170? (if someone might know both boats)
thanks
2018 G3 Sportsman 17 90 SHO
I can post the specs for it when I get home from work.I still have the brocher from when I bought my 01 X19.
2018 G3 Sportsman 17 90 SHO
2001 Hyper lift X17
Length 17'
Bottom width 54"
Beam 81"
Sides 22"
Transom height 21"
Seats 4
Approx. Weight 900 lbs.
Person motor and gear 1700 lbs.
Person/total weight 5/750
Aluminum alloy 5052 .100
Max hp.115
I appreciate you posting these specs.
By comparison my 2018 H17 has a bottom width of 59" and a beam of 88" with a hull weight of 951 # but is only rated for 90 h.p. Max.
Go figure.
A 115 would probably run mid 50's on my hull.
In your 2001 brochure should be specs on my first Xpress, an X60 which I believe was 18'3" with a 60" bottom, 87" beam and rated for 130 h.p. (Going from memory).
X60
Length 18'3
Bottom 60"
Beam 87"
Sides 26"
No.seats 4
Approx weight 1200 lbs.
Person motor and gear 5/750
Aluminum alloy 5052 .100
Max hp.130
Last edited by pa.X19; 07-05-2018 at 04:23 PM.
2001 X18
Length 18' 3"
Bottom 60"
Beam 87"
Sides 22"
Transom height 21"
No. Approx seats 4
Approx weight 1150
Persons motor and gear 1200
5052/ .100 on the hull
Max hp.150
2001 X19
Length shows 19' But it measures 18' 10
The rest right on the money.
Bottom 68"
Beam 90"
Sides 22"
Transom height 21"
No. Seats 4 ? 3 is to many
Approx weight 1225
Person motor and gear 1400
Person total weight 6/750
Max Hp.200
Hull 5052 .100
Oh yeah it's a ripper! Even with a150
Last edited by pa.X19; 07-05-2018 at 05:39 PM.
I would have preferred the lower sides and higher h.p. of X18. Wind affected the 26" sides more I believe. With dual steering I don't see why the X60 did not qualify for the same h.p. rating as the same length X18.
The same delema as my H17.
Thank you for sharing the information from your brochure. I tossed my brochure when I sold my X60 with F100 4 stroke after 10 1/2 trouble free years.
Great boat and got a super price on it from a dealer in Jemison, Alabama. Owner now deceased and business closed.
Could you post up the specs on a X70 or possibly shoot me a scan of the page? I would greatly appreciate it.
Thanks,
Chris
2001 X70
Length 18' 10"
Bottom 68"
Beam 90"
Sides 22"
Transom height 21"
No.of seats 4
Approx.weight 1180 lbs.
Persons,motor and gear 1400 lbs.
Persons/ Total weight 6/750 lbs.
Aluminum alloy 5052 .100
Max Hp. 175
My plate says 150hp, but I think if you rigged it with hydraulic steering it increased the hp rating. Is that correct?
Same hull as X19??
I'm completely rebuilding my X70 and they are hard to find info on.
Thanks, Chris
Yep same hull but different weight I don't get it. Not sure about the hydraulics for the 175 on the X70. It was required for the 200 on the X19. Not for the 175 though.
My capicity plate says 200 hp I have a 150 no hydraulic.steering.
If I ever repower with a 175 or 200 I would definitely want hydraulic steering.
Last edited by pa.X19; 07-18-2018 at 11:13 AM.
To further muddy that water ....... I've got a 2007 or 2008 brochure at home that states the 'X19 with 150, hydraulic steering gets 200' just like you said ....... my 2008 X19 had dual cable steering and a F115 on it when I bought it yet the capacity plate said 200. Thus before I drove all the way to Texas from South Carolina to pick it up, I had the dealer show me a picture of the inspection plate to make sure it was not going to be a '150 max' boat and have to go through all the headaches of getting it swapped to a '200 max plate'.
But anyway, it left the factory with dual cable steering and 200HP plate.
'09 Ranger Z520 Silverado Edition / '09 Evinrude ETEC 250 HO
'15 Xpress HD16DBX / Merc 59ci