-
Lost my transducers?
I've run my 2 axiom 9's twice and everything has worked fine. Went out today and none of my sonars worked, got an error message saying "no transducer connected, connect transducer and restart". Any ideas what could be going on? I did disconnect the plugs to put wire loom over the wires, but there's only two plugs per unit (not including raynet cable) and they are both plugged in on each unit, unplugged and plugged them all multiple times.
Thanks for any help,
-MIke
-
Have RV100 and P79 transducers.
-
Honda / Raymarine Moderator
-
Tanks Hickory, replied to PM...
-
Just to update, spoke with tier 1 support, reset transducers and installed the latest update, still no transducers found. The weird part was when on GPS maps it would show a depth reading on the toolbar. Spoke with tier 2 support and we were able to identify the transducers and get them connected. I don't remember the steps, but they work now.
-
You need to wire network box right to the battery
-
If you have it running to a accessory switch in the boat it will happen again
-
+1 on Al’s comment
Al - how’s the P75M working? I was in NH with Tom Pitasi last week.