Want to look into ordering a Phoenix

[XChris1632X]

I'm ready to at least start the process of ordering a boat. I'm thinking a 920 pro xp. For the right deal I am sure I could do a floor model. I have never ordered a boat so I am not sure how long it takes or exactly how the process works. Two things i really would like to know.

1- what options are must have options and what one are strongly recommended? I hear about some I've never seen anywhere like fan system.

2- who should I order from? I am in central Ohio. I tried contacting Wiedas Marine but never heard back from them. I am going to contact Malones.

[sdendy]

That is surprising on Wiedas I called them they called me right back. I would give Sean or Robbie another call. I drove from Kansas to Wiedas! That being said there are lots of great Phoenix dealers!

[vausoner]

If you emailed wiedas, you should call them and give them another chance.

[upscat]

Call John Webb at Marine works in Ky. You will be impressed.

[artdevilish]

Padded front deck
Shocks on trailer

[coachs]

Malone's is top notch also.

[DEFMP]

I used McCallister marine in MO and they were great. Now for options

1. Padded front deck - must
2. Paint over Gator Hyde on the trailer - must
3. C Channel trailer - recommended, must imo
4. Merc monitor or gauges for alarm definitions(if you go with a merc) - recommended
5. Over sized front trailer step, if you don't get the steps - recommended
6. Hydraulic jack plate - must imo, some will say recommended
7. ultrex - must
8. poles - recommended

that's a start I'm sure I missed something

[tmoney]

I'd recommend Boat Works in Carlyle, IL - Justin will take good care of everything and they don't get bogged down with tons of new boat orders like larger dealers.

My recommendations are the same as DEFMP, but I would also add dual trailer brakes and the fan system (water can get into the lockers when it rains a lot).

[Ray Co. Hank]

Dual axle trailer brakes
Shocks
C-frame

Pedestal mount in cockpit floor
Dual retractable rod straps
Merc monitor
Small gauge or low position gauge shroud

Electronics and TM of choice


Good luck on the Bird hunt!!

[ONECASTAWAY]

Call John Webb at Marine works in Ky. You will be impressed.

X2

Must haves:
- padded deck
- padded cooler lid
- merc monitor if going with Mercury
- paint over gator hyde
- trailer ratchet
- second set of ratchet straps on front deck
- 3x10 charger

i got these as well:
-atlas jackplate
-Ultrex
- integrated wiring
- c channel frame
- lazer cut outs

[MichPhoenix77]

Lake Drive Marine in Coldwater Mi is not that far from you. Great people. Ask for Jeff, he is the owner. They have a few models in stock.

https://www.lakedrivemarine.com

[Macy's Bullet]

I bought a new Bullet from Malones,good guy to deal with.

[Fidgetcranker]

Weida's Marine, ask for Richie. They didn't blow off a call, they must have been busy and it got overlooked. That is rare, give them another shot. You'll be glad you did.

[GBhoss]

Weida's Marine, ask for Richie. They didn't blow off a call, they must have been busy and it got overlooked. That is rare, give them another shot. You'll be glad you did.

X2

[Sam378]

Acs marine in Tennessee, I’ve got one on order from him right now, only person to hit the numbers I needed to be at, so I ordered one

[Fishin is life]

Id go with Wiedas for sure, and that would mean id have to drive past another dealership thats been mentioned. Ive dealt with Rich and he was nothing but top notch. You wont go wrong with those guys

[XChris1632X]

I sent a message to Wiedas, Malone's, and Marine Works. I will wait to hear from the 3 of them before I reach out to anymore. I'm usually not a fan of shopping around but need to see how other dealers operate. I'm not necessarily chasing cheapest price. I'm chasing price, service, and experience all factored together. I want to build a relationship with a dealer.

Thank you everyone for the help and opinions so far. I will keep everyone updated on the process. Later, I will also review the options I plan and review everyone's suggestions as well. I'm sure I will have questions.

[920screaming250]

go to closest dealer,they will compete for price...they don't like to work on boats if u didn't buy it there,sucks passing dealers,to get warranty work done were u bought it.....to me worth a little more to have a close dealer

[RockYScouT]

Service after the sell is the most important thing to me. To bad it's hard to test them on that untill AFTER you buy.

[Sinkey]

I have a 2018 21 PHX for sale in the classifieds that as loaded as you can get. And at a good deal!!! About $10k less than what you can buy it for.