Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2008
    Location
    Kelseyville, CA
    Posts
    2,760

    What am I doing wrong here

    (2) Solix 15 Mega units (new) on the boat (also new). When I navigate to a spot, go up front and take the bow unit off standby to fish, no problem. When I stow and but the bow unit on standby and get behind the wheel, the navigation is on full zoom, not the way I left it.

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,313
    #2
    Are you using Global settings?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member
    Join Date
    May 2008
    Location
    Kelseyville, CA
    Posts
    2,760
    #3
    I will check that, somewhere, somehow

  4. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,313
    #4
    Quote Originally Posted by Kromer View Post
    I will check that, somewhere, somehow
    Does that mean you don't know how to operate the units to know if they are setup to share all settings between units?

    Are they connected via Ethernet cable?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  5. Member
    Join Date
    May 2008
    Location
    Kelseyville, CA
    Posts
    2,760
    #5
    Hi Wayne,
    You are right, as a liletime Lowrance user I am still on the "learning curve" portion of the process AND at my age computers (which is what this is really) are not my strong suit.
    They are networked and routed through a H-Bird E-port box.