Ok changing prop on my maxxum 101 and it doesn’t have a pin, just a flat on it.

[mikesjet]

So what do I do now? This is the prop that minnkota says is correct.

[Jonestrollingmotor]

If your armature has the flat side, you need the 101 Weedless Wedge, not the 101 WW2 (Weedless Wedge 2). The Weedless wedge has flat tips and a flat side on the hole. The WW2 has turned up tips and uses a shear pin. You have the older motor. We have those props in stock.
John
870 773 3474

[Bradrodfish]

Pretty Sure the correct number for that prop is 1378130. I am not at the shop right now and to be 100% I would have to look at the one I have.
The one for the 101 with the pin is 1378132.
Call John I am sure he will help quicker than me.

[mikesjet]

Thank you for the responses. I did figure it out, that I had the wrong prop. Didn't see the serial number difference on the minnkota PDF.