95 Custom line single trailer axle setup.
65.25 c to c Springs
85.25 hub face
91 end to end
2.25 drop axle
Current axle is 2x3 tube
Anyone know where I can find one?
95 Custom line single trailer axle setup.
65.25 c to c Springs
85.25 hub face
91 end to end
2.25 drop axle
Current axle is 2x3 tube
Anyone know where I can find one?
UFP is the trailer parts supplier...
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Tried calling Eastern Marine all freaking day and days number isn’t current! Lol
DABS will help you out >>> http://www.bbcboards.net/member.php?u=5760 IM him.
Ask for him here>>> http://www.bbcboards.net/forumdisplay.php?f=146
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Sweetwater metal Corp. In Sweetwater TN. They sell ufb . Much easier to deal with
I’ve even thought of putting a straight axle on it to have a little lift to trailer and lowering the fenders to match. Lol
ChampionTrailers.com is a good source of parts and has tutorials on trailer repairs.
There are many sources of trailer axles and parts online. Redneck Trailer Parts is a component wholesaler to the trade.
Same measurements as all Customline's built for 20' Bullets with a single axle. You might note that the drop in that axle is only 1". The spindles are made to weld into a 2"x 2" square tube. They are welded into a 2"x 3" tube on 3 sides and reinforced on the open 1" side with a short piece of 2x2.
To further explain, on a regular 2x2 axle the centerline of the spindle will be of course in the center of the 2x2 axle, which puts it 1" away from all 4 sides of the axle.
On a 2x3 axle with the spindle welded to one side, the centerline of the spindle will be 1" away from 3 sides and 2" from the longer 3" side.
Inverting the axle will take out the 1" drop and make it the same spindle height as a regular 2" axle. This pic is of a 2x3 axle inverted to run the same height as a 2x2.
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
IMO I wouldn't put a standard 2x2 under my boat with just one axle.
The single axle 2x3 is a much stronger axle than a 2x2. It, along with heavier springs carry the same load as dual standard axles with lighter springs.
If you won't to get away from the drop then have them put the spindles in the axle accordingly or invert the axle when installed. If inverted you'll need to drill new locator pin holes and swap sides with caliper brackets.
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
Any of those mentioned above ^^^^ Check post #4
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
Called Waymires group and it’s looking like 400 plus from them. Looking at other options now
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Better check again... Keeping brakes on the trailer is a better idea and the law.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
What's the story on your original axle as to why it needs replacing?
Spindles can be replaced!
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe