-
Flo Torq 2 rattle
I have a 19 p Tempest plus and a 17P Rev 4. Plenty of rattle that I'd like to take care of. I've seen the recommendations for a Flo Torq 4 but wondering if a guy could just fix the 2?
The slop seems to be between the drive sleeve and the drive sleeve adapter. Plenty of slop in there. Wondering if a guy could use something like Permatex Ultra black to fill the corners and cushion to help tune out the rattle or am I nuts for even thinking this?
-
If you torque the nut to the proper torque you won't have any more problems.
-
Problem solved: The new Rev 4 came with a flo torq 2 hub that was loose fitting as tested prior to install which is what was concerning me. I removed the Tempest Plus 19 and found that it had the Flo Torq 4 hub so I swapped it over and will test.
-
-
After first outing the FT IV hub allowed for a ton of end play. I puled out the sleeve and trimmed it down so now I have no end play. Been snug ever since.
Reply With Quote