Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2018
    Location
    Weare, NH
    Posts
    1

    Hpdi low oil alarm

    I have an 04 skeeter zx225 and my low oil light came on the other day and the engine shut off. The oil in the main reservoir and on the engine are full. There some 2 cycle on the bottom of the engine compartment that I saw after removing the cowling. If you go straight down from the remote tank on engine and then to the left, there are 2 little male fittings/ nipples that stick out of the backside of the black box on the front of the engine. There is oil barely sleeping out of the bottom one and there are 2 lines that are just laying there not connected to anything. Are those supposed to be on the fittings?

  2. #2
    Seems there a two lines:

    One that runs from the top of the reservoir oil tank down to the intake (7)


    One that runs from the intake to the bottom of the vapor separator (25)
    Attached Images Attached Images
    • File Type: jpg 2.JPG (59.8 KB, 72 views)
    • File Type: jpg 1.JPG (60.5 KB, 74 views)


  3. Member
    Join Date
    Feb 2014
    Location
    Murfreesboro,TN
    Posts
    158
    #3
    I have had the float inside the tank on the motor to sink. That is prolly what the alarm is connected to.
    2006 Ranger Z20 Comanche