Thread: Bilge problem

Results 1 to 4 of 4
  1. 06-19-2018, 03:40 PM #1
    Nickel377
    Nickel377 is offline
    Member
    Join Date
    May 2012
    Location
    Bainbridge,GA
    Posts
    72

    Bilge problem

    I have a 2016 Ranger z520c. My main bilge pump when turned on sometimes will freeze up and the light will blink on the keypad. Also my automatic bilge pump is not coming on automatically. I cleaned out the bilge area and then filled up the bilge area with water and both pumps wood work when turned on at the keypad. But the Automatic Pump Still would not come on automatically even though the water was over the pump. Any help would be greatly appreciated.
    Reply With Quote Reply With Quote
  2. Bass AHolic
    Bass AHolic is offline
    Member Bass AHolic's Avatar
    Join Date
    Mar 2014
    Location
    NW GA
    Posts
    7,757
    #2 06-19-2018, 03:43 PM
    solid sealed float or the air pocket type?
    Reply With Quote Reply With Quote
  3. Nickel377
    Nickel377 is offline
    Member
    Join Date
    May 2012
    Location
    Bainbridge,GA
    Posts
    72
    #3 06-19-2018, 03:53 PM
    It is a rule-mate 750 gph 2839 lph. Which I believe is the air pocket.
    Reply With Quote Reply With Quote
  4. Bass AHolic
    Bass AHolic is offline
    Member Bass AHolic's Avatar
    Join Date
    Mar 2014
    Location
    NW GA
    Posts
    7,757
    #4 06-19-2018, 04:15 PM
    https://www.ebay.com.au/itm/GENUINE-...-/151571517403 I'd check the screen to make sure clean. and check float next time water is in and if float is stuck grab a piece of hose and blow some air under lloat so it has bubble of air to see if lifts and don't leak.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »