New boat, probaly from a rock while towing. Just a very small ding in clear coat over metal flake. I would like to fill it in to prevent potential spreading or cracking. It is not something that can be waxed out. What do you guys recommend to fill? Just need a dab of something clear, two part epoxy? I looked at clear gelcoat but I got I lost at all the products, some need gloss additives some need hardeners, etc., also don’t need a quart or gallon.
Just get the evercoat gel coat repair kit and just use the clear. Its easy
Thanks, after much searching I found a small tube of clear gelcoat.
Does it have the hardener with it?
It says it does, supposedly one step application.
Found this. Might suck, will give report on how well it works.
That should work
Did it look something like this? Wondering if I could repair myself or not. Thanks for any info on how you did with yours.
Started on it but undecided so far on results. Think the gel coat needs to cure for several days.
You can hit it with some patch aid and it’ll go ahead and kick.
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
I just have to patch it rewet sand and buff out...waiting on delivery of the clear patch now. Stuff is expensive. About halfway done on mine and this is what it looks like right now....
Reply With Quote