I forgot I hadn't posted these pics. I did this install about 3 months ago. Used Precision Sonar single mount at the console with a smart bracket for A Solix 12, added an Onix 10 next to it on a Ram swing mount. Just enough room to still see the speedo and gas gauge. Used the Wave Crusher mount and replacement bow panel up front for a Solix 15. This graph is massive. the heavy gage metal bow replacement panel is a must. The weight of the Solix 15 would have broken through the OEM plastic panel. I ran dedicated 10 gauge wire to each unit, the Ethernet switch. Ran 3 pair of these wires up front and to the console so there would be extras if ever needed. Ran them from a separate fuse box with a dedicated on/off breaker. Voltage holds constant between 12.8-12.4 all day, even with using power poles and leaving all 3 graphs on. Took a lot of extra time with this install but it has paid off with trouble free results.
[URL=http://s849.photobucket.com/user/nospny1/media/D9E4EFC3-23A8-46CB-B32E-87806A6F774C_1.jpg.html]
Reply With Quote