Just looking for ideas on what to check. I took the seat off the other day to make sure an electrical connection hadn't broken, come off, or gotten pinched. Everything looks good. The only odd thing I found was that there were two wires connected (one positive and one ground, I'm assuming), but one of the small bolts on the metal top had a spade connector on it, but nothing attached to it. I couldn't find a third wire anywhere, so I'm figuring there's no need for that connector. I cleaned the connections and took the top off to make sure the float hadn't come off or anything, and it appears to be fine as well. I got up under the console and checked to make sure the connections to the gauge were solid and they seem to be. Just wondering what else to check. Thanks for any help!