Went out this morning and the Ultrex seemed extremely loud and grinding. Pulled the prop and found a birdsnest of line. Removed all of it but the noise and grinding is still present. What should I do next??
Went out this morning and the Ultrex seemed extremely loud and grinding. Pulled the prop and found a birdsnest of line. Removed all of it but the noise and grinding is still present. What should I do next??
Probably ruined the seal and got water in the unit. Unless your handy with working on them you will need to take it in.
Last edited by kry29; 06-16-2018 at 07:55 PM.
Buy a new one.
2015 189 trx
Pretty simple in the motor housing. Remove prop and pin. If pin is stuck DO NOT use a hammer or you can bend the shaft. Remove the two long bolts and the whole back plate will come off. Pull out the armature and inspect. Chech the bearing at the front. Check the inside of the housing to see if a magnet fell off or a piece of it cracked off. Order a new seal kit and any parts damaged.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]