Hey y’all,
i just replaced my master cylinder on my 05 z21’s ranger trail and am having some issue bleeding the brakes. I went to the caliper farthest away from the cylinder and unscrewed the bleeders and had another person pump the cylinder with a screw driver. Yes I did prime the cylinder first as well. But while pumping the cylinder we could never get fluid to come out. I went the the first caliper just to see if fluid would come out of it and after some more pumping fluid did come out of it. Put those bleeders back in on the first caliper and pumped and pumped and the reservoir never got any lower on fluid and fluid never got to the second caliper. It seemed like fluid only lowered in the reservoir when the first calipers bleeders were out.
Do I have some kind of blockage? Anyone run into this before? Any suggestions would be greatly appreciated!!