Results 1 to 3 of 3
  1. #1
    carp_mstr carp_mstr's Avatar
    Join Date
    Aug 2007
    Location
    Topeka
    Posts
    1,411

    2.5 Mecury Performance Division

    I am looking at a 1995 Champion 202 DCX Elite with a 2.5 Liter Mercury from the Performance Division It has a pin hold down on top of the cowling and rubber hold downs on the sides and is EFI but you have to pre mix the oil as it has no oil reservoirs. Any ideals or info on this engine would be appreciated. Larry Brumley

  2. Member silverbullet02's Avatar
    Join Date
    Jun 2009
    Location
    Knoxville, TN
    Posts
    837
    #2
    Sounds like a 260, have a picture under the cowl? Not your average fishing motor if it is and needs a bit more attention.
    1995 Allison XB-2003 225 Super Mag. It's slow and I'm ok with that.

  3. Member
    Join Date
    Nov 2010
    Location
    Humble,TX
    Posts
    4,377
    #3
    Since it has a pin, there is no telling what it is as it’s been modified , could easily be a promax with oil injection removed and a pin added to the cowling.

    Or it could be a 200efi with a different cowl or a 260 etc etc

    pics of motor and numbers off the motor itself(not the serial on the clamp, because there is a good chance that has been alter d too