Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,939

    Aldebaran 51 - line guide

    I have a Aldebaran 51 (2016 model) that the "brass/gold colored" line guide came out of - it will not stay in. Not sure how factory puts these in and if I should just use a little superglue and push it back in or if there is a better way.

    THANK YOU in advance.
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.

  2. BBC SPONSOR reelex's Avatar
    Join Date
    Oct 2009
    Location
    Hidden Valley Lake, CA
    Posts
    2,886
    #2
    use Loctite Gel after q-tipping housing with some lacquer thinner and insert as well, then you should be good. Remember, little goes a long way. Dan
    " Serious Service for the Serious Angler"

  3. Member
    Join Date
    Nov 2008
    Location
    Lake Conroe, TX
    Posts
    1,939
    #3
    THANK YOU!
    Where are the BIG ones? When are we going?
    LOOKING for a Great deal on a Slightly used 20-21' Boat.