-
Member
reprogramming 2018 remotes
So somehow I messed up the remotes on my talon. The starboard light now controls both talons. How can I change this back to where they only control the one?
-
I would just reset them and start over
To clear the memory on the talons
Turn killswitch power off
Hold the up button on one talon, while holding turn power back on and let go of the up button, you'll here a long beep, lights will flash... that talon is reset now. Do the same to the other talon, then clear memory from the remotes, hold up/down buttons until the lights begin to scroll, let go and let it scroll until it stops, the memory is cleared, so that to the rest of remotes then just reprogram them