Which Talon brackets do i need for a 10" Atlas jackplate on a z521c?
Which Talon brackets do i need for a 10" Atlas jackplate on a z521c?
Minn kota part#1810340, I just did all this on my z20
Sorry, g2?
Make sure you get the tilt brackets.... I would have been in a hell of a mess had I not had tilt brackets when my spike would not retract.
M
Yes tilt brackets are well worth it!
My spike was not stuck in the bottom, it would not retract the fiberglass stake all the way in so it was hanging out 3' and I could not have loaded the boat on the trailer had I not had the tilt brackets installed.
I just got my boat back from the dealer after the warranty repairs to my Talons. Apparently, my Talons must have been manufactured on a Friday because the cables were twisted in one Talon but the other Talon needed the stake and the 2nd stage along with pullys and cable replaced. Not sure how it got so messed up unless it wasn't put together properly because I have only had the boat out about 7 times before they jammed. Hopefully everything goes smooth from here on out.
M
Last edited by Whistler; 06-28-2018 at 08:46 AM.