Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    May 2009
    Location
    Carmichael Ca
    Posts
    764

    Fury prop redesign

    Just bought a new 25P 3blade Fury and noticed that it has more cup and extends all the way around the tips. Quite a change from the 26 Fury I last purchased. As expected it will not allow the motor to flash upto 3600 rpm as my 26 would do. The hole is about the same as the 26.
    Has anyone else noticed this.
    Also only picked up 100 RPM, expected a little more
    Were these changed done to allow for running the motor higher
    Last edited by lpugh; 06-13-2018 at 10:59 PM.
    Thank You Leon Pugh
    leon.pugh@comcast.net

  2.  
  3. Banned
    Join Date
    Jun 2018
    Location
    Alabama
    Posts
    92
    #2
    Quote Originally Posted by lpugh View Post
    Just bought a new 25P 3blade Fury and noticed that it has more cup and extends all the way around the tips. Quite a change from the 26 Fury I last purchased. As expected it will not allow the motor to flash upto 3600 rpm as my 26 would do. The hole is about the same as the 26.
    Has anyone else noticed this.
    Also only picked up 100 RPM, expected a little more
    Were these changed done to allow for running the motor higher
    Are you planning on selling it? Let me know. I tried a new 25P fury 3 blade and it was phenomenal! Also, with 1 pitch difference, 100 to 150 rpms is normal. What rpms are you turning at WOT? What boat and motor? What's your PTP? What size and type jack plate? Do you have any plugs installed?

  4. Member
    Join Date
    May 2009
    Location
    Carmichael Ca
    Posts
    764
    #3
    No, but I will send it to Ronnie Gilbert to do his magic'
    I am just curious about the differences in this prop vs Fury props of the past
    Thank You Leon Pugh
    leon.pugh@comcast.net