05 legend LE-21 jackplate question.

[Footballfanatic8007]

right now the bow of my boat is down when I’m on plane then when I trim up it’s gets to about level I measured the pad and all the very best I could on level ground boat was level and the motor was as well the measurements are 9-1/2” from prop shaft to floor, and pad to floor was 14”. I’m not to sure if that’s what’s causing that I’m running a 26 pitch tempest prop on a 225 merc. Not too much stuff in front boxes. Thanks for your help.

[Legend LE-195]

Prop to pad on the older legends should be around 3.25 to 3.75 inches maybe a little more or less outside that range as all hulls are unique and a little different out of the mold.

[Footballfanatic8007]

Thank you for your reply!