Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2010
    Location
    Garrison
    Posts
    68

    Question 05 legend LE-21 jackplate question.

    right now the bow of my boat is down when Iím on plane then when I trim up itís gets to about level I measured the pad and all the very best I could on level ground boat was level and the motor was as well the measurements are 9-1/2Ē from prop shaft to floor, and pad to floor was 14Ē. Iím not to sure if thatís whatís causing that Iím running a 26 pitch tempest prop on a 225 merc. Not too much stuff in front boxes. Thanks for your help.


    If winning isn\'t everything, then why do they keep score?-Vince Lombardi

  2.  
  3. Member
    Join Date
    Mar 2009
    Location
    New Braunfels, TX
    Posts
    3,068
    #2
    Prop to pad on the older legends should be around 3.25 to 3.75 inches maybe a little more or less outside that range as all hulls are unique and a little different out of the mold.
    Last edited by waco oso; 06-13-2018 at 09:05 AM.

  4. Member
    Join Date
    Nov 2010
    Location
    Garrison
    Posts
    68
    #3
    Thank you for your reply!


    If winning isn\'t everything, then why do they keep score?-Vince Lombardi