When stowed the head of my ultrex has some play in it. Is this normal? When deployed you really do not notice the play at all but it is certainly loose when stowed.
Thanks,
Justin
When stowed the head of my ultrex has some play in it. Is this normal? When deployed you really do not notice the play at all but it is certainly loose when stowed.
Thanks,
Justin
Justin B.
Are you calling he top the head, or the lower unit?
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
The top.
Justin B.
One phillips head screw in the collar. See if it will tighten
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Had the same issue ... tightened the screw and that fixed it.
No sir, it will not tighten any. Is this supposed to be rock solid or have minimal movement?
Justin B.
Should be solid. Is the lower part cracked?
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Mine has minimal movement. Don't notice it except when deploying.. I use a two handed method.
Mine was like that when I installed it had no fastener at all.
2018 Ranger z520L
2020 250 Pro XS
2B694324
I got nothin
So, I tried the screw again and was able to get a little turn out of it. I was scared to put that much pressure on it before but after tightening the movement is gone. Many thanks.
Justin B.