Avoided a tragedy yesterday. When I pulled the boat out my motor was swung to 1 side. That has never happened before. I look around and I see the steering ram is not connected to the steering pivot on the motor. Some how the washer between the bolt and the ram cracked in half. I found half the washer in the splash well as well as like a carbon fiber washer. I’m trying to get the bolt out so I can replace everything, however, the bolt won’t come loose. I can turn it a couple turns each way but then it tightens up. Is there a trick to this? It’s too late to take some picks but I’m stumped. To top it off my box wrench is now stuck between the steering pivot and motor frame. Thanks in advance for any help.