Well I replaced the gauge and hose from motor to gauge, still no change......getting pretty fustrated with it now.
Well I replaced the gauge and hose from motor to gauge, still no change......getting pretty fustrated with it now.
If it worked before its gotta be an issue with the install. Id try to lower it on down to an inch below the pad just so you know for sure you should get water- if that dont do it its time to call bobs and see what you can check before sending it in. Id put a nosecone hose adapter on it and pull off the side hoses and check water flow
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Water pump in backwards? (Rotation wrong)
2005 Stroker 2010-250pro xs
I agree with alli ss. Either LWP was done incorrectly or lower/water pump install was done incorrectly
I will double check water pump today
SEE POST #8 and if there's no problem there then call Bob's!
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
What was wrong with the lower unit the way it was before you tried to modify it.