Thread: prop selection

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Feb 2017
    Location
    ohio
    Posts
    14

    prop selection

    I have a intimidator 00 its 19'6" I believe rated for a 200 hp motor. I just put a 200 Yamaha sho on it and its turning a 3 blade 26 pitch txp @ 6100 6000 rpms at about 72 73 mph. im curious if anyone on here has went through testing props. would I be able to gain mph with a 27 or 28 pitch? I also have a 10 inch bobs hydraulic plate too and im running it at about 2 inches. seems to handle there the best for me so far. any input on wht I should do would be greatly appreciated.

  2. Member low slung cruiser's Avatar
    Join Date
    Jul 2008
    Location
    LKG, LITTLETON, NC
    Posts
    4,858
    #2
    try something with 4 blades...26p

    although your current numbers arent bad for that set up!
    Sterling 22XS / Mercury Pro XS V8

  3. Major Flagelator Gamblinman's Avatar
    Join Date
    Jun 2004
    Location
    Yantis, TX
    Posts
    4,121
    #3
    Fastest prop for me is a worked Tempest. Best overall prop is a worked Bravo. I lose a couple of MPH top end, but the holeshot, midrange and handling are much better.
    "Better to remain silent and be thought a fool than to speak out and remove all doubt."