Hello forum members. I have a 2000 X-19 with 2001 Yamaha Vmax OX66 200HP motor. I have a yamaha 25 m prop that has been repaired from damage before according to the previous owner. I have a 6 in manual jackplate. I am only able to get 5000-5100 rpm and about 50 mph out of this setup. I know from reading on here, this is a 70 + mph rig. The current prop has some damage and I would like to buy a new prop that gives me the best performance I can get with my setup. I currently don't get enough bow lift at speeds over 30mph or so to ride up on the pad.
I have tried various heights from the bottom of my jack plate, all the way to the top and bow lift issues are the same at each location, so all I can figure is I need a new prop.
What would the experts here recommend I try prop wise, as I would like to buy a new prop and convert mine to an extra spare. Also, does anyone know what the maximum recommended RPM range is for my motor? Do I need to step down to a 23 pitch prop to get my rpm up. I have cleaned/replaced all filters, low pressure pumps, VST , and replaced 02 sensor in the last year but still can only get 5000-5100 rpm.
Thanks guys