New to Skeeter and wanted to see how everyone usually runs there live wells between using the Oxygenator, Recirc, etc.
New to Skeeter and wanted to see how everyone usually runs there live wells between using the Oxygenator, Recirc, etc.
I place on manual fill to begin with. After filling, I place on auto fill. Anytime I am going to be running on plane, I switch to full aerate.
After filling I place on Auto low(if water temp is below 80) Med- to 85 temp, anything higher on High
When running I place on Recirculate..
Once full, auto fill and auto recirc all day with valve closed and oxygenators on.... With the v t2 vents in the lids...
MattandAmber Lawler on Facebook
Matt Lawler HF on Facebook
matt_lawler_hf on Instagram
"There ain't a price on stupid. Stupid comes for free."
Jonathan Hillstrand
Once full auto fill and recirc after that.
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA
I run manual fill till full or I remember, then auto fill and auto recirculate with timer at high. Never had a dead one in my skeeter and they are about h to calm down at weigh in. Only time I do it different is early year when water temps are below 70, and I just run auto fill
I manual fill with livewell plugs in. I put recirculate on auto. When water heats up I put recirculate on manual (on all the time) and turn on my oxygenators. I will pump out a little bit of water and add fresh a few times in warmer water. Easy and never had any problems. I'm usually fighting them to get them out of the livewell!