I want to know what speeds , water pressure , rpm, jackplate height and prop size you are running please...
I want to know what speeds , water pressure , rpm, jackplate height and prop size you are running please...
gonna guess most guys have a 225 on that rig...
Critter post your current #'s. With a 200 its a high 60's low 70's rig loaded to fish depending on setup and load.
Stroker 21
Mercury 250 PRO XB
TN Bluewater dealer/rep.
BBO
This is a new to me boat I installed a rapid jack 6 in plate on it with 2 people I ran 67 gps water p was 15 psi @ 5900 rpm I am 3 in below the pad with a 24 p prop.. I have a 26 Raker that is in the shop when I went ti put it on its warped so I didn't want to put it on... I am new to jackplates so I don't k ow if I should raise or lower it I heard that my boat should run 70 in the normal conditions
Your boat is on par with what I would call normal. RPM is spot on and WP is on the bubble need to see 18. lower the motor just a tad.
Stroker 21
Mercury 250 PRO XB
TN Bluewater dealer/rep.
BBO
Thanks for the input do u think I will break 70 with the 26 Raker??
I run a 25 Renegade (which isn't the best prop) with no jackplate and every now and then I can hit 70.4 gps, so I think you should be able to touch 70ish.....If I had the money to spare, I would throw a Fury on just for grins....
To our troops