Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Asheville, NC
    Posts
    909

    Repairing popped rivets in rear storage compartment 21xrs

    My coangler was getting his stuff out of the boat this weekend in the parking lot and lost his balance and grabbed the open lid to catch himself. This caused the heads to pop off the 3 rivets toward the stern (there are 5 total rivets) that hold the lid hinge to the cap. How can I best fix this? Access to the rivets is pretty much blocked by the lip of the compartment. Any suggestions on how best to rig a fix appreciated.

    Attached Images Attached Images
    2015 Bullet 21XRS, 2021 250 Pro XS 4s - 3B014359

  2. Member
    Join Date
    Mar 2005
    Location
    Wilkesboro, NC
    Posts
    865
    #2
    Take the gas shock off and the lid will lay on back. That should give you enough room to drill out the old rivets and install the new ones.

  3. Member alli ss's Avatar
    Join Date
    Jul 2004
    Location
    Greenbrier, Ar
    Posts
    7,925
    #3
    They put em in there so you should be able to get em back

    xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector