Need 1998 201 trailer info

[alby]

Guys,
I need some help fixing a 1998 201 ez loader trailer that got bent up in an accident. I need to know the length of the roller arms center of roller to center of where it bolted to the winch post. I also need the approximate angle of the post to the frame. The manufacturer could not offer any help. See attached pic. Thanks.

[ski213]

About 17 7/16" from centerline to centerline of bolts measured straight between, not accounting for the slight bend up towards the roller. The post is 18 degrees from vertical as best as I can measure.

[ski213]

Pic quality sucks, just showing how I measured.

[alby]

Thank you sir! Just what I was looking for!!

[e-tec]

Are you going to replace it with a fixed winch post instead of the spring thing?

[alby]

I just fixed what was there leaving the spring thing. I'm not a fan of that nor is the owner but it is quicker than a redesign. He needed it fixed quickly to use this weekend.

[e-tec]

I am not a fan either. It is on my project list.