Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Aug 2015
    Location
    Midland NC
    Posts
    76

    Ultrex pedal in 175txw

    Does the Ultrex pedal fit in foot tray on 175txw?
    I believe it will can someone who has done this verify?
    Also do I need to get a new plug for tm/boat?
    Currently running 12v Edge

  2. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,868
    #2
    I copied this from a John Jones post in the trolling motor forum.

    Several have stated the foot pedal doesn't fit the recess. The recesses with the rounded back doesn't allow for the total length. I've installed them in Basscat's and Rangers without a problem, although the length on the Sabre interfered with the plug and had to put a disconnect at the batteries (as it should have) and leave the plug in. Below is the diagram that I posted earlier showing the dimensions. Please refer to this if if doubt before you order your new Ultrex.
    John

    It is hard to read but the width is 9.3 inches and the length is 12.5.
    Last edited by Bill Reynolds; 05-21-2018 at 07:14 PM.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  3. Member
    Join Date
    Sep 2009
    Location
    Lincoln
    Posts
    301
    #3
    Wouldn't fit in a 195 either, not wide enough.

  4. Member
    Join Date
    Apr 2018
    Location
    Lufkin, Texas USA
    Posts
    943
    #4
    Quote Originally Posted by Bill Reynolds View Post
    I copied this from a John Jones post in the trolling motor forum.

    Several have stated the foot pedal doesn't fit the recess. The recesses with the rounded back doesn't allow for the total length. I've installed them in Basscat's and Rangers without a problem, although the length on the Sabre interfered with the plug and had to put a disconnect at the batteries (as it should have) and leave the plug in. Below is the diagram that I posted earlier showing the dimensions. Please refer to this if if doubt before you order your new Ultrex.
    John

    It is hard to read but the width is 9.3 inches and the length is 12.5.
    Bill,
    Will it fit in the RT188 tray?
    I am thinking of swapping my Maxxum 70 for one in the near future.
    Thanks,
    Lynn
    2016 Ranger RT188 Charcoal Metallic Dual Console
    2017 Yamaha 115 VMAX SHO SS Prop
    Lowrance Elite 7Ti in console
    Humminbird Helix 10 SI on BBT Bow Mount

    Humminbird Helix 10 SI on a BalZout @ Console
    Minn Kota Ultrex 80 - 24V i-Pilot Link
    Transducer Shield Mount
    Custom step in place of center seat
    Trick Step

  5. Member
    Join Date
    Aug 2015
    Location
    Midland NC
    Posts
    76
    #5
    Thanks for the info

  6. Member
    Join Date
    Aug 2015
    Location
    Midland NC
    Posts
    76
    #6
    Are there any Tracker guys that have installed Ultrex who can help me? Just want t make sure I have everything.
    I have 6ga wire on current TM. Ordered new tray for foot pedal and 60 amp breaker. Anything else?
    Last edited by TrackerPT175TXW; 05-22-2018 at 09:24 AM.

  7. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,868
    #7
    Quote Originally Posted by BigDozer66 View Post
    Bill,
    Will it fit in the RT188 tray?
    I am thinking of swapping my Maxxum 70 for one in the near future.
    Thanks,
    Lynn
    The short answer is yes, I attached a picture to show the details.

    Attached Images Attached Images

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  8. Member
    Join Date
    Mar 2014
    Location
    thunder bay
    Posts
    122
    #8
    100% fits in a 195 tray...

  9. Banned
    Join Date
    Oct 2017
    Location
    Newman, CA
    Posts
    5,165
    #9
    Fits in mine just fine

  10. Member
    Join Date
    Sep 2009
    Location
    Lincoln
    Posts
    301
    #10
    Quote Originally Posted by bronzebacksmb View Post
    100% fits in a 195 tray...
    The one I saw must have been built on Friday at 4pm. The welds had to be cut to open it up and welded back together.

  11. Member
    Join Date
    Apr 2018
    Location
    Lufkin, Texas USA
    Posts
    943
    #11
    Quote Originally Posted by Bill Reynolds View Post
    The short answer is yes, I attached a picture to show the details.

    Thank you Bill!
    2016 Ranger RT188 Charcoal Metallic Dual Console
    2017 Yamaha 115 VMAX SHO SS Prop
    Lowrance Elite 7Ti in console
    Humminbird Helix 10 SI on BBT Bow Mount

    Humminbird Helix 10 SI on a BalZout @ Console
    Minn Kota Ultrex 80 - 24V i-Pilot Link
    Transducer Shield Mount
    Custom step in place of center seat
    Trick Step